Process Cleaning Agents
Process Cleaning Agents Selection
| Type | Product | Main Components | Target Dirt |
|---|---|---|---|
| Acidity | CONTROL HA-1 | Organic Acid | Calcium and Aluminum stains |
| CONTROL EHS | Organic Acid, Hydrochloric Acid | Calcium stains | |
| CONTROL MN | Organic Acid | Aluminum, Manganese, Iron stains | |
| Neutrality | CONTROL LP | Terpenes Nonionic Surfactants |
Pitch Dirt |
| CONTROL EZ-3 | Starch decomposition enzyme (amylase), Stabilizer | Starch stains | |
| Alkalinity | SKYPOL KDX | Chelating Agents Anionic Surfactants |
Calcium stains |
| CONTROL TX | Chelating agent, Dispersing agent | Calcium and Barium stains | |
| CONTROL CX | Inorganic halogen compounds Anionic Surfactants |
Slime stains | |
| Non-Aqueous | NEWTRON IAS-7 | Hydrocarbons Nonionic Surfactants |
Pitch Dirt |
| NEWTRON HC-8 | Terpenes Nonionic Surfactants |
Pitch Dirt |
Mechanism of Action of Process Cleaning Agents
Process cleaning agents are chemicals that clean and remove dirt that has built up in pipes and processes when operations are stopped.
It is necessary to select the appropriate process cleaning agent depending on the type of dirt.
◆Examples of Process Cleaning Agent effectiveness◆
[Dissolution with Organic Acids]
We select inorganic acids with high dissolving power and special organic acids with high safety and corrosion resistance according to the application.
[Dissolution by Chelating Agents]
It is most effective when used in combination with caustic soda.